Folding chair is a design to build in oak, 453 × 580 × 880 mm, from 20 parts.
Skill levelIntermediate
10 housings (dados) · 2 round tenons in drilled holes at an angle · 1 fold on pivots
What the plans include
- Step-by-step building instructions with every measurement (PDF)
- The cut list (CSV)
- A drawing of every part
- CNC cut files for every part (DXF)
- The 3D model (STEP and STL)
See a sample of the plans (PDF) All chair plansYour plans
Everything you need to build it.
Cut list
| Qty | Material | Size, mm | Pieces |
|---|
| 5 | 15 mm oak | 409 × 38 × 15 | back slat 1, back slat 2, back slat 3, back slat 4, back slat 5 |
| 7 | 16 mm oak | 390 × 44.6 × 16 | seat slat 1, seat slat 2, seat slat 3, seat slat 4, seat slat 5, seat slat 6, seat slat 7 |
| 1 | 20 mm oak | 437 × 35 × 20 | front stretcher |
| 2 | 20 mm oak | 390 × 40 × 20 | left seat rail, right seat rail |
| 1 | 20 mm oak dowel | 327 × 20 × 20 | rear stretcher |
| 2 | 22 mm oak | 1038.8 × 147.5 × 22 | left post and front leg, right post and front leg |
| 2 | 22 mm oak | 701.7 × 40 × 22 | left rear leg, right rear leg |
Length always runs along the grain.
Hardware
- 14 × 4 x 40 stainless screw
- 10 × 4 x 50 stainless screw
- 2 × 5 x 50 stainless screw
- 2 × M6 x 45 furniture connector bolt and sleeve nut
- 2 × M8 shoulder bolt, its plain shank the stop
- 2 × M8 x 80 carriage bolt, washer, cap nut
- 2 × stainless spacer
Joinery
Made with proper joints, as a joiner would. Untick a kind to make those joints simply instead: butted together and held with screws, dowels, nails or glue. Simpler joints are about half as strong.
Files
Part drawings one by one (20)
CNC cut files one by one (20)
For your own use: you may sell what you build, but not mass-produce it. Please don’t share, resell or post the plans or files. The licence